4*500W Digital Amplifier with DANTE+DS Features:
Switching power technology digital power amplifier
Build in DANTE and DSP module, with very less delay and good sound quality
Build in four channel amplifier fault output.
Build in 100V/70V and 4/8ohms speaker output by DIP switch
Four channel power amplifier into 19" rack mount unit
Rated power output at 4x500W
Four channel separate speaker outputs 8Ω/100V
Balanced XLR input by phoenix connector for four channels
Each input with separate gain control.
Each four channel with high-cut filter.
Built-in auto standby feature to save power consumption
Separate four channel indicators for protection, clip, input and output
Complete short circuit, overload, high temp, clip and DC protection
Support AC230, DC24V with operational
Description:
The FA-4500DT range digital class-D power amplifier is of switching power technology, which features of minimum power
consumption and much higher efficiency up to 85%, moreover it helps to save installation rack space, generate less heat
so as to extend its performance life span as a result.
The FA-4500DT is a amplifier with DANTE+DSP module, it can transfer the audio though internet with very less delay,
DSP Processor is easy to let user adjust the audio signal to be a better quality as they want, this is good solution for long
distance transfer and high sound quality requirement.
FA-4500DT is with four balanced inputs by phoenix connector for each channel with gain control. Four separate zone
speaker outputs both by 100V & 8ohms. The built-in four channel separate high-pass filters could be enabled or disabled
through the dip switch pre-setting.
Automatic standby enable after no detection of signal input for one minute, immediately wake up at sight of any input.
Visual working status indicators include protection, clip, input and output for easy supervision. With complete short
circuit, overload, high temp, clip and DC protection.
Class-D
DANTE+DSP
P
FA-4500DT
4*500W Digital Amplifier with DANTE+DSP
Specification:
Model
FA-4500DT
Description
Class-D Amplifier with Dante+ DSP
Rated Power Output
4x500W in 100V
Speaker Output
8Ω & 100V/70V
Frequency Response
L/H Cut OFF 20Hz-20KHz (+1/-2dB)
L/H Cut ON 70Hz-10KHz (+1/-3dB)
Input
0.775V, 0dBu, balanced phoenix connector by four channels
IP protocol
Dante protocol
DSP processor
Build in DSP module
Input Impedance
10KΩ
THD
<0.1% (1KHz/-3dBv, 100W)
S/N Ratio
>80dB
Crosstalk
>60dB, 1KHz, Max output
Power Consumption
2300W
Power Supply
AC input switchable between 115V & 230V, 50-60Hz
Dimension
482(W)x420(D)x44(H) mm
Weight
8.5kg
){kind=link}